Tuesday, March 29, 2011

H Street Revisited

Now that H Street is coming back into its own, I wanted to pick my father’s brain about what it was like back in his day, in the 1920s. I decided we ought to take a tour, and see what was left, so we climbed into my pollen laden car and went back in time.

Our first hurdle was driving down H Street from Northwest to Northeast Everywhere we went the streets are being ripped up or there is new construction. Plus Dad couldn’t see through all the green funk on the windshield so that was a handicap, but we finally found the block where my grandfather, Peter Cokinos, had his candy shop at 1103 H Street. There’s a convenience store and an empty space there now, but back then he used to make candy and ice-cream in the basement. He made a very good living at it, too, and retired in about 1926.

I asked Dad if there were any other Greeks around back then, and it sounds like you couldn’t swing a cat without hitting a half dozen families - including branches of our own clan. Jim Cokinos, a first cousin, to Papou, had a deli at 10th and K, and the Kendros family lived nearby. There was the Kavakos Grill at 8th and H which became a nightclub during World War II, plus The Rendezvous which the Kalevas family ran. The Chaconas Bar and Grill was at 10th and H, and the Bacchus Grill was at H and 15th ( owned by the Bachhus family not the god)
He also remembers the Paramount Grill was run by two Greek brothers. It was "a blue collar sort of breakfast place". (Imagine that.)

Besides all the Greeks ,there was also Whall's Department Store which was 2 stories high and carried everything. There were three movie theaters- the Apollo, the Empire and the Princess - all of them gone now. (The Atlas which is now a performing arts center
didn’t open until the late thirties.) There were lots of beauty shops and barbershops- altogether a thriving business community.

Our next stop was 919 11th Street, the house Dad and his older sister, Catherine were born in. Peter Cokinos bought this house brand new probably in 1914. The block is a little worn down now, the fluted columns on the houses have been replaced, but it's still standing. Our family moved from here to Macomb Street around 1927.



We nabbed a mail person and continued down memory lane.
A few blocks away, at the corner of Montello and Neal, we found
Samuel Wheatley Elementary. Dad didn't recognize it at first as it had gained two large additions since he went there, but the whole school is empty now. This is where Dad and Aunt Catherine walked to school,
and where they learned to speak English for the first time.

Next it was over to the DC Farmer's Market. ( not to be confused with Eastern Market) A lot of the stalls are boarded up now. Of course, Dad remembers when it was all going full force, though it took us a while to find Litteri's Italian market. The paint has faded, but little else has. changed, and Mom thought she even recognized one of the countermen. After waiting a couple of years for a couple of sandwiches which were actually worth the wait, we picnicked with the carpenter bees at my son Kit’s school, Hardy which is being housed in a building that was the Hamilton School. The school is located on Brentwood Parkway just off Florida Avenue, within walking distance of his grandfather's childhood.

Dead Trees

Here is a shot of two of the cottonwood trees that were killed by the fire but haven't been carved into figures yet. The sandhill crane on it's tree trunk can be seen in front. If you look close you can see Coors Blvd behind the park with the housing develpment that is to the west of Coors Blvd. The parking lot for the park can also be seen along with a distant view of the eagle.

Monday, March 28, 2011

Showtime with the Lipizzan Horses


I have visited these horses and wrote about them enough times that I'm beginning to feel like a dating ad when I talk about them. It's hard to not talk about how fabulous they are when you share pictures of them. They are such gorgeous creatures.




They are strong, impressive creatures!



They even have great hair!



What I don't think I've talked about yet, is the fact that they are clearly trained to be showmen.



Since I don't speak horse, I have no idea if they enjoy us being there or not. But I can tell they are comfortable and used to us being there by how they interact with the crowd.



If those pictures were not proof enough, check out this one.

Best.Horse.Shot.Ever.



I swear he was looking at me saying," and hoooolllldddiiinnnngggg...please just take the shot already!"




Love the Lipizzaner horses. Living the life in sunny Florida.

A second look at modern dry tooling?



In 1976...not like there were many options, Chouinard or curved gear and the lone Terrordactyl. Ice climbing alone would bend or break them. Hit a rock? Minor disaster the majority of the time!





Most give the credit of"modern" ice climbing to Yvon Chouinard and curved gear.Chouinard may have marketed it and made it popular in North America. I don't think heinfluenced the sport long term as much as many of us might have thought originally.



No question there was a modern ice climbing movement that could easily be defined world wide as the free ascent of Bridalveil Falls as the defining effort in 1973 by Lowe and Weiss.



Jeff Lowe writes of seeing torquing and hooking picks as a logical extension of climbing with tools. He was doing it back in the '70s by his own admission. His routes are clear testimony to his skills and less obviously the techniques he was adapting to during those early years.





Tobin Sorenson and Gordon Smith did a major new route on the Grand Jorasses in 1977.

"Tobin Sorenson and I did the first free ascent back in late October 1977 and we didn't use Desmaison's fixed stuff at all... we found plenty of ice and snow on the lower section, including a beautiful narrow ice gully about 1/4 of the way up reminiscent of Scotland at its best. We took a variation on the right and did not find any of Desmaison's fixed stuff until the top of that beautiful gully - where a rope came in from the left. That was pretty much all we saw. (NOTE: The right hand is definitely the most logical start to the route). We bivied a few pitches above this on a ledge to the right of the route proper just above a large roof which we turned on the right. A lot of mixed climbing up a series of ramps and a notable 'shark's fin' of granite sticking out of very hard blue water ice took us to the headwall. We bivied again on the headwall behind a flake of rock in a horrendous blizzard - Tobin used my padded overpants (courtesy Desmaison found on a broken footed retreat from a previous attempt with Black Nicky Colton) while I was wrapped up in a bivi tent (also courtesy of Mons. D). Tobin joined me in the bivi tent eventually and we sat there until it got sort of light. Then we went out for a wild Scottish day of howling snow and gale and gripping climbing ... Tobin led the crux headwall pitch (thank goodness) with 2 falls and much wailing about the need of a sky hook. He was brilliant! Note: we didn't have a sky hook for him to use ... he didn't even have a terror for 'dry hooking' - only a curved Chouinard axe - we had a pair of terrors for me and a chouinard axe and hammer for him and we both had bendy grivel 12 pointers. In fact all Tobin's gear was borrowed as his only ice climbing experience was the first ascent of the Smith-Sorenson ice groove on the West Face of the Plan a couple of day's earlier. I got rather nervous as our ropes were 2 x 200 foot 8MM laid ropes ... very thin looking!! I knew the descent from the Walker and Croz so we almost beat nightfall to the Italian hut ... There I found I had two frostbitten feet which were hard to hitch home to Blairgowrie with and Tobin went on to do the Eiger Direct with Dirty Alex (GRRRR - and they used those 8MM laid ropes of mine)... It was a great mixed route and very sustained with not a lot of resting spots and quite the feeling of seriousness (especially given the empty rucksack we found behind our bivi flake ...). The Smith-Sorenson ice groove was very nice and would have fitted in well on the Ben - it's just to the right (facing the cliff) of the Gabbarrou Picard-Deyme couloir and quite similar to that climb for difficulty."

Some perspective?

Gordon and Tobin Sorenson did a major new route on the North face of the Grand Jorasses in 1977. A British party claimed a first free ascent on similar terrainin '07.

.

http://www.alpinist.com/doc/web07f/newswire-jorasses-scots-desmaison







More from Gordon Smith on tools and ethics:



"What do you do with one of the new tools when you go over the top of a bulge of hard (or crappy) ice into deep powder snow? That was one of the main reasons I loved my terror axe and would have considered climbing with 2 axes and a peg hammer, except that the axe was too light for hard, brittle ice. I never had a 'Barracuda' to go with my Chacal...I gave up alpinism before it came out (even before the Chacal was available commercially). What was the adze on that like? Judging by your photo I think I would have really liked to climb with a chacal and a barracuda.



I refer you to the article on the Croz posted above ... Kingy (Terry King) (and I) considered 'hooking' and 'torquing' etc as pure cheating (near the end of the article). Clearly ethics change!"



1981 Stump and Aubrey on the N. Butt of Hunter? Stump used a short Curver axe, a Roosterhead hammer (US copy of the Terrordactyl) andSMC rigid crampons. And similar gear on the East face of Moose Tooth with Bridwell. But Bridwell used a pair of Forrest Serac Saber tools. The Saber is easily comparedto an over grown Peck Terrodactyl. And a key piece of gear for that climb by Bridwell's account. The first written account of ice tools being used to climb rock that I have seen.



Jim Bridwell specifically mentions hooking stone and "nuting" with a pick of a Forrest Serac Saber (over grown Terro) on the 1st ascent of the Moose Tooth with Stump in '81. "A desperate struggle ensued at these overhangs. ice axes and hammers became useless weapons against these fortifications. Forced onto tiny edges for crampons and shaky pitons for handholds, I often used my ice tool picks as cliff hangers on rock edges or wedged in cracks, nut fashion." "Dance of the Woo Li Masters"



Duncan Ferguson on "modern mixed" :



.…” But it was only after reading about Scottish climbing, “that I sorted out what I wanted to do with my ice climbing--forget the ‘thick ice’ part of it and see how far I could go with a pair of Terrors and a new attitude and vision. A redefinition of what ‘ice climbing’ was…. Spent the entire rest of the season wandering around by myself and bouldering and traversing and soloing short mixed climbs. Rock climbs really, with a set of Terrors and crampons. Thin ice, snowed up rock, rock moves between patches of ice and pure rock.…”



Ferguson's word, "redefinition". And I think rightfully gives credit to the McInnes and his Terro for our current "mixed climbing". The Terro is also the basis for the tools we now climb ice with. In my mind there is not question it wasn't Chouinard who "invented" modern ice climbing but the Scots and the Terro.



“Without the Terrordactyl, we’d still all be swinging.”--Duncan Ferguson, 2001.





Duncan Ferguson again: “even though credit for much of the impetus for modern ice climbing has gone to Chouinard and his curved tools, I strongly feel that it is the Scots and MacInnes in particular and [his Terrordactyls] that ushered in the birth of modern mixed climbing.”



Mick Fowler and Chris Watts might have called it aid in 1982 on the South East Buttress ace of Taulliraju in Peru. But a few pictures of the Chacal and its mate the Barracuda adze in action on that ascent in MOUNTAIN MAGAZINE at the time made me aware of the potential of the new tools on mixed.

I wasclimbing on both the Forest Lifetimes and the new Simond tools by the winter of '80 and '81. No question they upped my game on pure ice.But it would beyearsbefore I would take full advantage of the technology on mixedwith a Nomic.





Today? It is not the same sport. Gyms, bolts and most importantly tools that are designed for and able to take dry tooling and full body weight torques are the norm. Climbers are stronger and smarter. But the tools and what we accept as the ethical norm today allows us to pull on any wall. M5/M6 (5.9/5.10) is now a trivial M-grade in the mtns when you consider current technical standards. Modern leashless tools not only allow you to use the tool as a "sky hook" but correctly fitted, it is a TCU through a medium size cam, a good thin hand to full hand jam, and works as a decent nut to pull up on from 1/4" to over an inch, all usable for BOTH hands on one tool.



Raphael Slawinski said,"Dry tooling where a few years earlier climbers would have tried rock climbing and, failing that, resorted to aid, has also helped turn some alpine test pieces, like the Andromeda Strain, into trade routes. To some extent, a new generation of mixed climbs in the Canadian Rockies is blurring the distinction between M- and alpine climbing."



"To some extent?" Raphael's article is 10 years old and already out of date. Just as ice climbing changed radically in the mid '70s mixed has as well in the first decade of this century.



More of Raphael Slawinski's original article:

http://sportandmixedclimbing.com/mixed_issues/mixed_article.htm



And more on modern mixed:

http://www.climbing.com/exclusive/links/Vail_mini-guide_Belfry.pdf



A-Strain is now regularly done as "crag" climb, car to car @ M5/6 AI4 with great pro. This rating is from a recent winter ascent in terrible, dry conditions.



A-strain was originally rated as a V 5.9 A2 WI4, as a 2 day summer climb and state of the art in '83 after years of attempts.



Most of the great Canadian North faces have fallen to similar tactics, time and grade changes as techniques and tools changed.



We are all using the M-grades now for mixed. I think we should acknowledge that beyond a new grading system, somewhere along the line the mixed climbing game changed. My take is that change occurred the moment we had picks that you could torque in a crack with full body weight or do a stein pull on.



How about "REinvented hard mixed climbing"...simply 'cuz it aint anything like mixed climbing has been up until even just a few years ago.







Hooking and using tools while aid climbing on "M routes" is obviously the norm today, with the tools, boots and crampons all developed specifically for modern mixed climbing. In '81 it was seen as a desperate set of circumstances to get yourself out of a bad spot. There were few replaceable pic tools (Chacal and Forest Lifetime) then. None were 100% on ice, putting any of them on rock was a sure way to break a pick. Imagine using a fixed pick axe like the "Serac" in the same circumstances with no spare tools handy.



Great stuff but let's not try to pass it off as any type of climbing that was done as the norm in the past.



From John Bouchard of Wild Things among many things:



"When I did the Eiger in 1978 with Rick Sylvester, we took the wrong exit crack--I had to climb a rock wall to get out. Since it was snowing and cold, there was no question of taking mittens off. My recollection is that there were small in cut holds that begged for a tool placement. The downward angled blade of the Simond Chacal prototype I was using did not skid off the holds and the crampon front points felt more secure that boots. But of course, on the belay ledge, there was a rotting canvas backpack containing rotting wool mittens and 10 pt crampons whose leather straps were half decomposed. That fact may have influenced my thinking."



"As far as the dry tooling thing; my recollection is that it was something that occurred naturally. I never enjoyed short, hard routes characterized mostly by difficulty or unusual moves--I preferred longer climbs, in the late 1980's when Gerry Handren described dry tooling to me I thought it was something artificial. A

couple of years later, when Mark Richey and I finally did the a winter ascent of Girdle Traverse of Cannon Cliff we wore crampons for the entire route. The Black Dike finish to the route was remarkably tenuous because we had worn out front points down to stubs and our hand tool picks were round."



From Doug Klewin,

who in 1983 with Todd Bibler did the first complete ascent of the North Butress of Mount Hunter:



"I don't think I was quite able then to think "out of the box" and realize to full potential of standing on those little points and hooking the tools like sky hooks. I can remember top roping on the vertical pillars that formed on the road cut on Stevens Pass and with a top rope trying it out. Actual on climb experience is foggy for me. I'm thinking kept the crampons on when Todd andI did Edith Cavell but no tools...pretty low angle. I also remember doing a few moves of pretty step rock with the gear at the top to the gully (French route?) when I was on Hunter with Todd & Pat the first time."



From Jim Nelson,

who did among his many winter ascents also did an early ascent of the Infinite Spur on Mt. Foraker:



I'll give this some more thought, but I don't think I've ever really done any true dry tooling. Rock only, with no ice. I think the dry tooling I've done has been on alpine climbs where it was mixed rock and ice, or snow over rock, thin ice, etc. A few climbs that come to mind are:



North Face of North Peak of Index. The pitch above the bowl leading to the ridge. Late 70's or early 80's I can't really remember. Before that, some climbs on Guye Peak and Chair Peak. Snow over rock type stuff, with very little if any ice.



A climb I did with Scott Fischer, East Face of the Tooth. 1st pitch not pure dry tooling, but mixed with very minimal ice. The last pitch started with steep rock with no ice. Scott started up the pitch, then backed off and I was able to lead it and pretty sure my tools on rock experience helped. I think Colin (Haley) repeated this climb with Dylana few years ago. Early 80's, I think."



From Carlos Buhler:

One of the most successful American climbers



"There was a moment in the late seventies that I remember almost picture perfect. I was on the North Face of Point Domino in the Argentiere Basin (French Alps) with Adrian Burgess and Alan Rouse in March, 1979. We were trying a new route that Alan had spotted during his many forays into the area. (Alan

was living in Chamonix at the time and climbing full time. Aid and I were in Chamonix and Scotland for the winter.



Alan led a difficult pitch which Aid and I were following. At one point as I climbed, I came to a short, smooth granite corner that looked tricky (desperate, actually). I could see that lay backing the crack for a few moves might put me in reach of some holds a ways above me. But instead of dropping my ice axes onto the wrist loops and climbing the lie back with my fingers, I, for some reason, (probably because it was a cold, iced up crack!) inserted the pick of one of my (Forest?) axes into the corner crack and used that to start lay backing to gain height. I am not sure what else I used the ax for on that pitch, but remembering back to the moves, I realized instantly that the technique had made the corner easier for me. I am not sure how Alan had climbed the pitch on lead. But I do remember that he was looking down at me from his belay to see how I would solve the moves he had just made.



I had no sense of cheating or aiding the climb when I did this, as I recall. (I guess that shows you how rotten my ethics and style were compared to the British.) I just recall trying to move as quickly and efficiently as

possible on the cold face."



From Mark Westman:

KnownAlaskan hardman:



"Iremember the moment clearly- I was climbing Triple Couloirs on Dragontail Peak in the Cascades with Joe Puryear in the ancient days of February, 1995. I had only owned ice tools for about 11 months and had used them three-times- Liberty Ridge, Mount Baker's north ridge, and Chair Peak. We were total ice/mixed newbies and probably over our head, but thankfully we were luckier than good. Anyway, we had bypassed the second couloir due to thin ice (in retrospect I think it was fat...) and finished on the north face into the third couloir. There's a steep pitch of rock that gains the third couloir and I had charged headlong up into the rock without placing any protection. Since rock was easier than ice to me at the time, I avoided an ice strip that breached the rock in favor of some rock steps that appeared moderate from below, and then I did what I usually did in the early days and holstered my tools and started climbing the rock with my gloved hands. Before I knew it I had run myself out into a bad situation, far, far, above my gear and suddenly the rock got steep, blank, and not climbable for me- up OR down. The thick strip of ice I had deliberately avoided (after all, ice was scary..!) 20' off to my right suddenly looked great. How could I get over there? The only way was a near vertical traverse across a rock face that was not going to be possible in gloved hands. However, a pair of tiny rails/edges existed, one just big enough for the crampon points on my feet, the other just at eye level and just big enough for the tips of my picks. Using my two mismatched ice tools- one with a "classically" drooped pick- I negotiated this traverse without incident aside from seeing god (later I discovered that I was hallucinating, god is not real, jeez...). It was also the first time I experienced the thrill of sinking a solid tool into fat ice once I arrived at the strip. I don't know if that was an "epiphany" of any sorts but I'll never forget it. Not long after, the lingo "M-Climbing" became popular and I realized that, hey I had done that! :)





In all seriousness, I think a more teachable moment for me was a few years later when I actually went "drytooling" for the sake of it, at the crags in the Rockies. The lesson was that M-climbing made ice climbing seem SO much easier, and when I took the skills I learned at the crags to the Alaska Range, I suddenly looked at rock sections much differently. I remember Barry's (Blanchard's) report from the Infinite Spur mentioning that the "great drytooling" the rock afforded allowed them to only use their hands about 10% of the time on the rock. Joe and I climbed the route a year later in 2001 and afterwards we joked that we only used our ice tools on the rock about 10% of the time. After I spent the winter of 2003 living in Canmore and climbing nearly every day, including lots of mixed, I climbed the south ridge of Mount Hunter, and when on the rock sections, everything in my perception of how to climb it in winter conditions had changed.



1985...ha. I was a sophomore in high school and still 7 years away from tying into my first rope. The term drytooling in those days for me would have spawned predictable sophomoric humor..... "



From my perspectivethe real change came from the newest tools of the late '70s and early '80s. Dry tooling at least as we know it now was being done by a few/some/manyat the forefront of the sport by 1985. But it was not typically donestyle before 1977/1978. And not a fully accepted style for another few years yet. It seems the date and the tools are veryspecific once you start looking.Both thethen new Forrest Lifetime and the Simond Chacal which proceeded it by a season or two allowed a climber to break a pick and replace it as required. The replaceable picks also allowed the metallurgy of the actual pick to make a big leapin durability.The Serac Saber might well have been the beginning because of the new manufacturing techniques used, cutting from flat plate first, forming and then heat treating. No question is was a stronger pick than the hammer forged curve gear that came before it.







My own experience? I distinctly remember climbing the last bit of mixed buttress and gullybefore breaking out onto the upper arete and snow fieldon Edith Cavell in crampons. The rock crux I had done in double boots but somewhere, some how I had changed over again and was now back in crampons. My feet on thin 65/70 degreeice. Tools intentionally holstered (yes we actually had tool holsters bitd ;) to keep from damaging or breaking them on the rock if I had dared to swing one again. But there were enough rocks protruding from the ice to offer balance and support. Wool finger gloves provided all the protection I required. They were shredded by the time I had climbed through the shale band, cut a smallcornice and rolled on to the flat ridgeline just a few steps away from the summit cross. That was true hard mixed for me in 1980. I remember theterrain looking a lot like the picture taken on Dragontail almost 3 decades later.



Fast forward to . Dragonatail in this condition, early December, was the first time I actually used a monopoint crampon on rock and intentionally stuck an ice tool's pick (a Nomic) into rock over and over again and pulled up on it. Old habits die hard. But the climbing has gotten easier and more secure from my perspective. Those same Nomicsand their original picks, a bit shorter of course, are still going strong. After several more miles of rock climbing, the DartsI eventually sold as "worn out".

Progress!Left to right: Lifetime, Chacal and a Terror.






Larger Continent, Longer Trips, Hotter Days, Grandiose Daydreams

Having just returned from abroad, many important matters were on the agenda. Naturally, one of them was a trip to Harris Cyclery. The shop is 9 miles from our place and the temperature was over 100F, but nothing could deter me from going on a ride after sitting still in a airplane for hours.

Good thing the Co-Habitant had those two bottles on his bike, because the heat and humidity were brutal. In Vienna I had gotten used to taking many short trips throughout the day and almost forgot that "commuting" and "errands" in Boston are a bit different. But I am clearly in better shape now than I was even a couple of months ago: The 18 mile round trip to Harris Cyclery used to feel like a "pilgrimage," but now it's just a casual trip.

As for the sun and heat, these are my solutions. Over the past year, I have been trying to switch to natural hygiene products: essential oils instead of perfume, herbal deodorant instead of aluminum-based antiperspirant, and mineral-based sunblock. It has not been easy. In Vienna I've finally found Eco Cosmetics SPF 30, which I love. Its only active ingredient is titanium (to which I am, thankfully, not sensitive) and the rest is herbal moisturisers. It works perfectly and is soothing on the skin. Finding a deodorant was even more challenging, but I've finally found the Queen Helene Tea Tree Oil Deodorant Stick. It works for me as well as the real stuff, and I like that it has a dry, matte texture, as I hate the feeling of sticky roll-ons. So there - if you are looking for natural ways to deal with sun and heat, these have worked for me. On the ride to Harris I neither got sunburnt nor had a "deodorant failure".

At the bike shop I picked up a couple of things I had been meaning to get, and also something unexpected: They had a stack of boxes with clipless shoes on clearance, and I bought these for $25.

They are SPD shoes that can be worn either with cleats attached on clipless pedals, or as regular shoes on platform pedals. I know, I know - I was just making fun of the Co-Habitant for getting clipless shoes and pedals. But I will explain that these aren't for any of my regular bikes; they are to practice for the velodrome (I plan to get a license when I return to Vienna in November). I brought a vintage frame back from Austria for fixed gear conversion, and I will need to put a foot retention system on it and finally force myself to learn. I did not plan to buy the shoes so soon, but here they were in just my size and at a great price - so now I have them.

Clipless shoe love? I don't know. The Co-Habitant was victorious as I made my purchase, suggesting which pedals I should get to go with the shoes (and me vehemently disagreeing). Later in the day, I wore the shoes (without cleats) on a 26 mile ride, just to see how they felt or regular pedals. Frankly, I am not in love with the super-stiff soles. I like moderately stiff soles, but these felt like overkill and detracted from comfort. Is this degree of stiffness an acquired taste that you get used to gradually? And I wonder whether the "ugly as sin but comfortable" Keen sandals everyone is getting have a similar feel to them?

In any case, I have my bike project plate so full at the moment, that it is comical. In the coming weeks, we will finally build up my Royal H mixte, make some much-anticipated updates to my Raleigh DL-1, and oh yes, create a fixed gear bicycle. Stay tuned, and try to stay sane in the heat!

Gear Geek?






BCP "Arena"


There aren't many things on the planet that can't be improved. Generally (but not always) they can be improved by simply making them less complicated or making them easier for the human form to adapt to the technology. The Colt 1911 pictured above has 49 parts. The handgun was initially designed in the year, 1911. It is still state of the art today for its intended use. Parts have been made to better fit the human hand and for easier use but still the same 49 parts.



I geek out of all sorts of toys. Vintage 911 Porsches, carbon fiber road bikes, ice tools, packs, mtn bootsand cold weather technical clothing are just a few of my interests.



Six winter seasons ago I was introduced to the Nomic. Only 2 seasons previous to the that, the original Quark. And I thought the Quark without a pinky rest was "radical" tool at the time.



It took me 90' of top rope climbing to realise just some of the huge potential in the Nomic. I knew I didn't what a razor sharp adze staring me in the face on a pull up. But even then I couldn't wrap my head around not having a hammer easily available. Back to the previous topic of "make it at home".

A decent hammer for the Nomicwould seem to be a a simple process to design. After all it is only ONE part :)



A 911 has several complete "systems* (brakes/unibody/suspension/engine as examples) to deal with. That accumulation of systems (made of specific parts)defines the end performance of a 911, a 1911or a Cervelo for that matter.



My hunt for the perfect Nomic hammer started that first season. My first Nomic hammer was achopped up Petzl hammer TIG welded to the Nomic mixed pick. Next step was to fit the Nomic with a bolt on hammer like the older style Quark. Then I saw Ralph Burns' (no relation) May of '07 adaptation of Petzl's own design work from the original Quark. Great idea. And Ralph was generous enough to share his effort with the entire climbing community. But less room to work with on a Nomic head than the older and much largerQuark head. Less weight was needed imo, not more. The answer wasn't a simple adaptation of Petzl's previous technology. The projectneeded a bigger picture view and more thought put into the ergonomicdetailing.










Ralph Burns' early hammers cut from Petzl parts.

Photos above are courtesy of:

http://www.ascent-design.com/projects/other_ice_hammers.html




I continued my quest for a better hammer to be usedon areally funky hammer handle...the Nomic. I was lucky enough to get some help from other interested and technically astute climbers.






Colin Haley'sphoto of Bjorn-Elvind Aartun soloing on the Cassin




The late Bjorn-Elvind Aartunwas one of the first to use the early CT production hammers and offer constructive criticism. It was his idea to cut the hammer face literally in half for a swing weight and a better over all balance of the climbing tool. Balance is just oneof the reasons the Nomic excels for its intended purpose. Mind you only the first few prototype hammers were cut from Petzl parts. Theproduction CT hammers were being cutfrom bar stock and then heat treated. I had the option of doing anything I wanted for profile and finished weight. Nomics did not have a hammer so the pick and hammer inner face was open to new design efforts as well. You have no idea how happy I was to see Petzlfinally commit to a hammer/pick design interfaceof their own 2 winters ago and not have to cut another pick for my hammers over lapping interface.















Half of the current CT hammer cut from bar stock


There is always room for improvement. Even on a 100 year old design like the 1911 pictured above. Pictured below are 6 seasons worth of slightly differing Nomic hammer designs. The ideawas to have each version a little better than the previous. Not as easy as it might seem to go from A to Z. Not trying design H, L, or R might well be a mistake. So if you really want the best you might use more than one fabric, more than one design or more than one steel in the process.
















The current design was always intended to use with either the old or the newest style Nomic. I wanted it to be the best hammer available for the awkward Nomic shaft, offer as much protection of the Nomic's soft aluminum head and just as importantly not effect the balance of the Nomic any more than absolutely required.













A hammer is rarely needed on a Nomic. And the CT design is only one of three available for Nomic owners. It is how ever the easiest to fit to the original Nomic head design that Petzl has never offered a hammer for.









And yes, I have some spare hammersleft from the last production run.

You can purchase them on Pay Palfrom the link listed below.



http://coldthistle.blogspot.com//01/cold-thistle-hammers.html





Sunday, March 27, 2011

Solidly Summer

It was pretty late last night as I put away the garden fork and picked up the hand tools, trying to find them all with the light fading fast. There was a flash, and another, and another as the fireflies lit their lamps. I was tempted to try to catch a few and see whether my camera could focus on them, but decided that such treatment of these small sweet visitors would serve no purpose but to ‘feed the blog’. So they flitted unmolested and I watched them and was happy to live where they live.
We called them lighting bugs when I was a kid, and they were around every summer in Illinois. When we moved to our first Austin house, for five years I saw no fireflies. Was it the rocky terrain? Drier weather? Whatever the reason, May has brought us fireflies in the three springs we've lived at this house, and their appearance also confirms that we have crossed the line from Spring to Summer.
The butterfly plants that were mere buds in the last post have opened and the garden is alive with bees and butterflies. Buddleja “Black Knight” has exploded in dark, blue violet wands, with the Achillea Moonshine adding golden landing pads for insects. The Verbena bonariensis is able to pull passing butterflies right out of the air – do any of you grow this plant? Philo took this photo of a swallowtail seeming to caress the flower.
This verbena was an annual in the north, but once you got it going, it almost always reseeded, even after below zero winters. Here it acts like a short-lived perennial, tall and bony in nature, useful for the edges of the border, where it acts as what Allen Lacy used to call a ‘scrim’ plant – a see-through curtain, softening the view and adding to the drama. The seeds tend to sprout at the edges of the bed, so as old plants die and new ones grow to blooming size, the curtain moves to work its effect on different scenes of the garden’s stage.
With no satin pillow for the first tomato, I looked around for something special enough. This rosewood platter was made by my daughter in wood shop a few years ago. At that time, the philosophy of the middle schools was that every person should know how to do basic things – so all the students, both boys and girls, learned how to do some cooking and some sewing. Everyone took shop, everyone had some personal finance instruction and all students got basic consumer education. This little platter wasn’t a regular project – my daughter loved woodshop so much that the teacher allowed let her make this as an extra treat, and let her choose from a cache of small pieces of unusual wood. I loved it from the minute she brought it home, and could think of nothing finer as a salver for the Juliets. They tasted just fine! And the Early Girl might be ready tomorrow.The Salvia guaranitica seen in the last post has opened more flowers, and on the opposite end of the bed, the Salvia guaranitica cultivar called ‘Black and Blue’ is now open, too, ready for bees and hummingbirds. The flowers are very similar, but this one has dark stems and the calyx is very close to black
Some of you in cooler climates are planning to grow Salvia guaranitica as an annual - I wish you lots of luck and hope you get to see these Salvias yourselves. Down here they grow so well they take over whole beds, needing to be pulled up like weeds before they smother their neighbors.

There’s another flower looming over us – the Pecan trees are in flower, too. The female flowers grow on spikes that emerge from the ends of some branches, but the male flowers hang down like this, in long trailing bunches, wafting pollen in the wind like cheerleaders shaking their pompons.
Soon the long strands will turn yellowish-brown and drop off by the hundreds, covering the area under the trees and inducing allergy headaches in the gardener who is trying to clean them up.
Congratulations and many thanks to Pam from Digging, who wrote a very cool story about the Austin Garden Bloggers. Some photos were taken the day we had our Ground Robin and they appeared in the paper, along with Pam’s article which was printed in the Austin American Statesman last Saturday.
We promised not to say anything before the article came out in print, but now we can proclaim it – you’re wonderful!

Dynamite M6 First Ascent




Putting work into Dynamite M6


Recently I wrote about a mixed climb that I had top roped last season. It was a fun line that I thought was worth investing some time and effort into. In recent days I spent some time equipping the route and giving it a few tries with State College climber and friend Joel Torretti. Early season and tired arms shut me down several times. With a night of rest I managed to get it. This new climb at Irishtown crag in Dunbar is now officially named Dynamite and is roughly M6. Yesterday my faithful partner Laura accompanied me to video, belay and motivate me for the send. With several days pump and some sheer determination I sent. I decided to put a short clip together to show everyone the climb. I hope this motivates more folks to come join in the great winter climbing that Southwestern PA has to offer. This is my first ever attempt at doing any video work, so any feedback is appreciated. click here and enjoy the clip!


My newly created helmet art


Tomorrowshould be an incredible day. Its Laura and myfirst day back at the local big ice playground. Laura and I are so excited to get our first pure ice day in (maybe). Rumor has it thatice climbing hardmanand old buddy Chip Kamin will be joining us for some tool swinging at some of the biggest local ice he's ever climbed. Dr. Bob, Regina, Felipe, Laura and myself are planning for some big fun on the best looking early season ice in 10 years.Of note, last yearI witnessedan incredible mixed lineform that I hadn't seen in otheryears. If its in tomorrow, I think I may have to investigate. Stay tuned for the details!






Projected corner line (last season) - Ohhhh, Ahhhhhhhh!


Thursday, March 24, 2011

Buddy and Diane Visit Us at The Villages


We had a visit from some of our favorite people in the world: Buddy and Diane. They came during the week that Nathan and I went back down to Wauchula, but luckily they waited for us to get back for a night out with them and Rich and Donna.



We headed down to Wildwood to eat at a place that Rich and Donna had been to before, the Cotillion Southern Cafe.






We had dinner reservations at 4:30. We arrived early enough to peek at the menu that had sitting out front. It looked like a wonderful country cooking menu to me. Once we were inside I could see how unique this place really was. The decorations were so down home and relaxing, right down to our mis-matched dishes at our table. Most importantly was the food there. It was very good! We ordered a variety of dishes and we all agreed that our food was wonderful. I highly recommend this place to anyone in the area.






We enjoyed our night of fun, food and most important of all: Friends!

KHS Green: The Loveliest Budget Bike

[Edited to Add: There is now an updated review of this bicycle here]



One stumbling block in the purchase of a classic step-through city bicycle, is the shocking price tag. Be prepared to spend upward (in some cases very much upward) of $800 USD for a quality Dutch-style bicycle with 3 or more speeds.



Refreshingly, there is one alternative. During my trips to local shops, online research, and chats with surprisingly bike-knowledgeable acquaintances, I came across the "Green" bicycle made by KHS.





Made especially for stylish and safe commuting, the KHS Green features the relaxed-style frame and handlebar construction and comes fitted with fenders, a rack, and a partial chain-guard. It is a 3-speed, with a Shimano hub. It has both coaster brakes and a hand-brake. And it is priced at $350 USD! As one reviewer put it (I paraphrase, unable to find the original text): This is the least expensive bike worth buying.



The bicycle on the photo above is the KHS Green, ladies' frame, that I rented from Cambridge Bicycle (more on this later).